Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2021-01-22
|
Emphasis |
N: DUSTEXPL
|
Case Closed |
2021-08-12
|
Related Activity
Type |
Referral |
Activity Nr |
1720601 |
Safety |
Yes |
|
Type |
Inspection |
Activity Nr |
1512412 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Other |
Standard Cited |
19100022 A01 |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
10942.0 |
Initial Penalty |
10942.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition: (a) On or about January 22, 2021 - Blanket line, combustible dust had accumulated on overhead pipes and equipment, greater than one inch in depth in some areas, exposing employees to a fire hazard. |
|
Citation ID |
01001B |
Citaton Type |
Other |
Standard Cited |
19100022 A02 |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided: (a) On or about January 22, 2021 - Blanket line, combustible dust had accumulated on the floor of the blanket line and around the re-baler, greater than one inch in depth in some areas, exposing employees to a fire hazard. |
|
Citation ID |
01001C |
Citaton Type |
Other |
Standard Cited |
19100178 C02 VII |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.178(c)(2)(vii): Power-operated industrial trucks designated as DY, EE, or EX were not used in atmospheres in which combustible dust is not normally in suspension in the air by normal operation of equipment or apparatus but where deposits or accumulations of such dust could be ignited by arcs or sparks originating in the truck: (a) On or about January 22, 2021 - Blanket line, employees were operating propane-powered forklifts where combustible dust had accumulated on overhead pipes and equipment, greater than one inch in depth in some areas, exposing employees to a fire hazard. |
|
Citation ID |
01001D |
Citaton Type |
Other |
Standard Cited |
19100307 C |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: (a) On or about January 22, 2021 - Blanket line, combustible dust had accumulated on motors, control panels, and electrical boxes, greater than one inch in depth in some areas, exposing employees to a fire hazard. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19100212 A03 II |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
10239.75 |
Initial Penalty |
13653.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Related Event Code (REC) |
Referral |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: (a) On or about January 14, 2021 - Re-baler on blanket line, employees were exposed to struck-by hazards when employees could reach over the baler hopper guard and reach into the baler while the ram was operating. |
|
Citation ID |
01003A |
Citaton Type |
Serious |
Standard Cited |
19100219 D01 |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
4103.25 |
Initial Penalty |
5471.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) On or about January 22, 2021 - Blanket line, employees were exposed to caught-in hazards when the conveyor pulley approximately 5 feet from the floor was not guarded on the bottom and one side. |
|
Citation ID |
01003B |
Citaton Type |
Serious |
Standard Cited |
19100219 E03 I |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) On or about January 22, 2021 - Blanket line, employees were exposed to caught-in hazards when the drive belt for the straw conveyor approximately 5 feet from the floor was not guarded on the bottom and one side. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19100146 C03 |
Issuance Date |
2021-07-13 |
Abatement Due Date |
2021-08-06 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2021-08-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.146(c)(3): When the employer decided that its employees would not enter permit spaces, the employer did not comply with 29 CFR 1910.146(c)(1), 29 CFR 1910.146(c)(2), 29 CFR 1910.146(c)(6), and 29 CFR 1910.146(c)(8): (a) On or about January 22, 2021 - Blanket line, the employer had not evaluated the workplace to determine that the blanket line re-baler was a confined space, evaluated work performed by employees to insure that employees did not break the plane of the confined space nor posted warning signage. |
|
|