Menu
Search icon
  1. Home Page
    2. ›
  2. Counties
    3. ›
  3. Lee
    4. ›
  4. 36803
    5. ›
  5. Dudley Lumber Company, Inc.

Dudley Lumber Company, Inc.

Details

Name: Dudley Lumber Company, Inc.
Jurisdiction: Alabama
Legal type: Domestic Corporation
Status: Exists
Date of registration: 01 Jul 1967 (58 years ago)
Entity Number: 000-006-195
Register Number: 000006195
ZIP code: 36803
County: Lee
Place of Formation: Lee County
Registered Office Street Address: 602 SOUTH 7TH STREETOPELIKA, AL 36803
Authorized Capital: $25,000
Paid Share Capital: $10,000

Activities DEAL IN TIMBER
WOOD

Incorporator

Name Role
DUDLEY, JOHN ROBERT Incorporator
DUDLEY, BERRY C Incorporator
DUDLEY, MARTHA S Incorporator
DUDLEY, CAROLYN P Incorporator

Agent

Name Role
MASSINGILL, VICKI DUDLEY Agent

USAspending Awards. Financial Assistance

FAIN Awarding Agency Assistance Listings Start Date End Date Description
10970499 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2011-03-14 2011-03-14 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD, REDUCE SOIL EROSION, IMPROVE WATER QUALITY, & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 9917.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9649540 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-06-23 2010-06-23 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 8711.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9630270 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-06-23 2010-06-23 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 29229.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9447815 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-04-29 2010-04-29 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 1980.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9469063 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-04-21 2010-04-21 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 7169.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9462433 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-04-21 2010-04-21 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 14694.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9478258 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-04-06 2010-04-06 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 18875.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9509749 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-04-02 2010-04-02 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 374.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9254916 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-03-29 2010-03-29 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 25967.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
9402312 Department of Agriculture 10.069 - CONSERVATION RESERVE PROGRAM 2010-03-25 2010-03-25 CONSERV RESV PRGM; TO PROTECT THE NATION'S LONG-TERM CAPABILITY TO PROD FOOD REDUCE SOIL EROSION IMPROVE WATER QUALITY & CREATE WILDLIFE HABITAT
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 2763.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 4478.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 20862.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 11497.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 7239.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 2301.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 6504.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 17593.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page
Recipient DUDLEY LUMBER COMPANY
Recipient Name Raw DUDLEY LUMBER COMPANY
Recipient DUNS 042096164
Recipient Address PO BOX 7, SALEM, LEE, ALABAMA, 36874-0007, UNITED STATES
Obligated Amount 1393.00
Non-Federal Funding 0.00
Original Subsidy Cost 0.00
Face Value of Direct Loan 0.00
Link View Page

OSHA's Inspections within Industry

Inspection Nr Report ID Date Opened Site Address
346987456 0418600 2023-09-19 8575 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Fat/Cat
Scope Partial
Safety/Health Safety
Close Conference 2023-09-20
Case Closed 2024-11-04

Related Activity
Type Accident
Activity Nr 2082753

Violation Items
Citation ID 01001
Citaton Type Other
Standard Cited 19100030 A01
Issuance Date 2024-02-20
Abatement Due Date 2024-03-05
Current Penalty 0.0
Initial Penalty 10372.0
Contest Date 2024-03-15
Final Order 2024-12-04
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.30(a)(1): The employer did not provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart before any employee is exposed to a fall hazard. And/or the employer did not ensure employees are trained in the requirements of this paragraph on or before May 17, 2017. a) Chipper Area; On or about September 18, 2023, and at times prior, employees were exposed to fall hazards up to 25 feet in that the employer did not train employees on fall hazards before they used a portable ladder.
Citation ID 01002
Citaton Type Serious
Standard Cited 19100333 A02
Issuance Date 2024-02-20
Abatement Due Date 2024-03-05
Current Penalty 10372.0
Initial Penalty 10372.0
Contest Date 2024-03-15
Final Order 2024-12-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.333(a)(2):Where exposed live parts were not deenergized (i.e., for reasons of increased or additional hazards or infeasibility), work practices that were used were not suitable for the voltage level of the exposed electric conductors or circuit parts: a) Sawmill Area; On or about September 18, 2023, and at times prior, employees were exposed to electrical hazards in that employees were allowed to work from and supporting a portable ladder placed next to live electrical parts/wiring.
Citation ID 01003
Citaton Type Serious
Standard Cited 19100333 C07
Issuance Date 2024-02-20
Abatement Due Date 2024-03-05
Current Penalty 10372.0
Initial Penalty 10372.0
Contest Date 2024-03-15
Final Order 2024-12-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.333(c)(7):Portable ladders did not have non conductive siderails if they were used where the employee or the ladder could contact exposed energized parts. a) Sawmill Area; On or about September 18, 2023, and at times prior, employees were exposed to electrocution hazards in that the employer allowed employees to utilize a portable ladder without non-conductive side rails where the employee or the ladder could contact exposed energized parts.
Citation ID 02001
Citaton Type Other
Standard Cited 19100132 D02
Issuance Date 2024-02-20
Abatement Due Date 2024-03-05
Current Penalty 0.0
Initial Penalty 0.0
Contest Date 2024-03-15
Final Order 2024-12-04
Nr Instances 1
Nr Exposed 2
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.132(d)(2):The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a)Sawmill Area; On or about September 19, 2023 and times prior the employer failed to verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated, the person certifying that the evaluation had been performed, the date(s) of the hazard assessment, and which identified the document as a certification of hazard assessment.
345926810 0418600 2022-04-25 8575 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Referral
Scope Partial
Safety/Health Safety
Close Conference 2022-04-26
Emphasis N: AMPUTATE
Case Closed 2022-08-12

Related Activity
Type Referral
Activity Nr 1886539
Safety Yes

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 19100028 B01 I
Issuance Date 2022-07-08
Current Penalty 3840.0
Initial Penalty 6340.0
Final Order 2022-08-03
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.28(b)(1)(i):29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): a) Planner mill; on or about April 19, 2022 and at times prior to the employer exposed employees to fall hazards in that employees would work on a platform outside of the stacker hoist that was 4 1/2 feet from the ground level without first ensuring that employees were protected from falls.
Citation ID 01002
Citaton Type Serious
Standard Cited 19100265 C18 I
Issuance Date 2022-07-08
Current Penalty 7796.0
Initial Penalty 13052.0
Final Order 2022-08-03
Nr Instances 1
Nr Exposed 2
Related Event Code (REC) Accident
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.265(c)(18)(i):Pulley(s), sprocket(s), sheave(s), drum(s) and block(s) of conveyor(s) were not arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt(s) and pulley(s) or chain(s) and sprockets: a) Stacker; On or about April 19, 2022 and at times prior to the employer exposed employees to amputation hazards in that employees were permitted to work at the stacker at or near unguarded chains and sprockets that moved the material from the stacker to the outfeed area.
342355187 0418600 2017-05-24 8575 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Planned
Scope Partial
Safety/Health Safety
Close Conference 2017-05-25
Emphasis L: FORKLIFT, N: AMPUTATE, P: AMPUTATE
Case Closed 2018-01-23

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 19100147 C06 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 4000.0
Initial Penalty 8963.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Saw Mill and Planer Mill; On or about May 24,2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that the employer failed to conduct the required periodic inspection of the energy control procedures for machinery with multiple energy sources which includes but is not limited to the Gang Saw, Debarker / Cut up System, and Planer Mill Trim Saw. Employees were required to work on these machines with procedures that had not been audited periodically as required by the standard so that any deviations or inadequacies would be discovered and corrected.
Citation ID 01002
Citaton Type Serious
Standard Cited 19100147 F03 II D
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 4000.0
Initial Penalty 8963.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were required to work on the Gang Saw together without all employees applying a personal lockout device on the energy control lockout point(s).
Citation ID 01003
Citaton Type Serious
Standard Cited 19100212 A03 II
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 4000.0
Initial Penalty 8963.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury was not guarded: a) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to operate a Hitachi Compound Miter Saw with a broken blade guard.
Citation ID 01004
Citaton Type Serious
Standard Cited 19100219 F03
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 3000.0
Initial Penalty 8963.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Planer Mill - Sorting Table; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work within two feet of an unguarded rotating exposed chain and sprockets on the sorting table that were located less than one foot to the floor.
Citation ID 01005
Citaton Type Serious
Standard Cited 19100303 B01 VIII
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 3000.0
Initial Penalty 8963.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.303(b)(1)(viii): Electrical equipment was not free from recognized hazards based on other factors that contribute to the practical safeguarding of persons using or likely to come in contact with the equipment: a) Planer Mill - Pull chain before Strapper; On or about May 24, 2017 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around an electric motor that had its wire connection box broken off exposing the motors electrical conductors to damage.
Citation ID 02001
Citaton Type Repeat
Standard Cited 19100022 A01
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 10000.0
Initial Penalty 14341.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 20
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to slip, trip, and possible fire hazards in that employees were required to walk and work in an area that had used oil bottles, paper boxes, saw dust, cloth and other trash piled up. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.22(a)(1), which was contained in OSHA inspection number 784181, citation number 2, item number 1 and was affirmed as a final order on December 19, 2012, with respect to a workplace East Alabama Lumber Company, Inc. located at 910 9th Avenue SE, Layfayette AL.
Citation ID 02002
Citaton Type Repeat
Standard Cited 19100147 C07 I B
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 12000.0
Initial Penalty 17927.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: a) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to potentially hazard energy sources in that employees were not provided training in lock out tag out as an affected employee which explained the purpose and use of energy control procedures on equipment. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(7)(i), which was contained in OSHA inspection number 934646, citation number 1, item number 5 and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 02003A
Citaton Type Repeat
Standard Cited 19100219 D01
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 26000.0
Initial Penalty 17927.0
Final Order 2017-12-11
Nr Instances 4
Nr Exposed 4
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around an air compressor that had unguarded pulleys. b) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a bark belt vibrator motor that had unguarded pulleys. c) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a chip belt vibrator motor (middle of the saw mill area) that had unguarded pulleys. d) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a chip belt vibrator motor (back of the saw mill area closest to train) that had unguarded pulleys. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.219(d)(1), which was contained in OSHA inspection number 934646, citation number 1, item number 8/a and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 02003B
Citaton Type Repeat
Standard Cited 19100219 E01 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 0.0
Initial Penalty 17927.0
Final Order 2017-12-11
Nr Instances 4
Nr Exposed 4
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around an air compressor that had unguarded belts. b) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a bark belt vibrator motor that had unguarded belts. c) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a chip belt vibrator motor (middle of the saw mill area) that had unguarded belts. d) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to walk and work around a chip belt vibrator motor (back of the saw mill area closest to train) that had unguarded belts. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.219(e)(3)(i), which was contained in OSHA inspection number 934646, citation number 1, item number 8/b and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 02004
Citaton Type Repeat
Standard Cited 19100265 C18 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 20000.0
Initial Penalty 25097.0
Final Order 2017-12-11
Nr Instances 9
Nr Exposed 5
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.265(c)(18)(i): Construction, operation, and maintenance of conveyors was not in accordance with American National Standard B20.1-1957, which is incorporated by reference as specified in Part 1910.6: Section 6 Design Features and Section 602 Pulleys, Sprockets, Sheaves, Drums, Blocks. a) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the conveyor at the Roll Take Line. b) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the conveyor at the Hydraulic Strapper Line. c) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the conveyor at the rollers to the Hydraulic Strapper Line. d) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the conveyor at the first chain on the Stacker Line. e) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the conveyor at the pull chain before the Hydraulic Strapper Line. f) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded protruding shaft with an open keyway on the conveyor rollers near the Hydraulic Strapper Line. g) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded belt and pulleys on the Return Belt to the Edger. h) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded belt and pulleys on the Incline Belt from the Head Rig. i) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around unguarded chain and sprockets on the Infeed to the Sharp Chain Conveyor. j) Saw Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to amputation hazards in that employees were required to work around protruding unguarded shaft with a keyway while sorting boards near the incline belt. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.265(c)(18)(i), which was contained in OSHA inspection number 934646, citation number 1, item number 10 and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 02005
Citaton Type Repeat
Standard Cited 19100303 G02 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 12000.0
Initial Penalty 17927.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets of other forms of approved enclosures, or other means listed under this provision: a) Planer Mill - near Strapper; On or about May 24, August 28, 2013 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around a hydraulic power unit with an electrical cover removed exposing live 480 volt AC 3 phase. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.303(g)(2)(i), which was contained in OSHA inspection number 934646, citation number 1, item number 12 and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 02006
Citaton Type Repeat
Standard Cited 19100305 B02 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 2000.0
Initial Penalty 3586.0
Final Order 2017-12-11
Nr Instances 3
Nr Exposed 3
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Planer Mill - First chain on the stacker; On or about May 24, 2017 and at times prior thereto, the employer exposed employees to electrical hazards in that employees were allowed to walk/work around a motor connection box with a missing cover which exposed the electrical conductors. b) Planer Mill - Near the planer; On or about May 24, 2017 and at times prior thereto, the employer exposed employees to electrical hazards in that employees were required to walk/work around a motor connection box with a missing cover which exposed the electrical conductors. c) Saw Mill - near the incline belt from the head rig; On or about May 24, 2017 and at times prior thereto, the employer exposed employees to electrical hazards in that employees were required to walk/work around a motor connection box with a missing cover which exposed the electrical conductors. Dudley Lumber Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305(b)(2)(i), which was contained in OSHA inspection number 934646, citation number 2, item number 5 and was affirmed as a final order on March 4, 2014, with respect to a workplace located at 8575 Hwy 280 East, Salem AL.
Citation ID 03001
Citaton Type Other
Standard Cited 19100305 B01 I
Issuance Date 2017-11-17
Abatement Due Date 2017-11-28
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2017-12-11
Nr Instances 2
Nr Exposed 2
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around exposed electrical conductors entering a motor connector box on the Roll Take Line that was not protected from abrasion. b) Planer Mill; On or about May 24, 2017 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around exposed electrical conductors pulled loose from conduit near the rollers that go to the strapper; these conductors were not protected from abrasion.
Citation ID 03002
Citaton Type Other
Standard Cited 19100305 B01 II
Issuance Date 2017-11-17
Abatement Due Date 2017-11-30
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2017-12-11
Nr Instances 1
Nr Exposed 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Saw Mill - underneath / bottom floor; On or about May 24, 2017 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around an LB conduit body near the chip belt vibrator motor (back of the saw mill area closest to train) that had an unused opening not effectively closed.
339308421 0418600 2013-08-14 8575 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Planned
Scope Partial
Safety/Health Health
Close Conference 2013-08-14
Emphasis L: HINOISE, P: HINOISE
Case Closed 2014-03-11

Related Activity
Type Inspection
Activity Nr 934646
Safety Yes

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 19100095 I02 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-05
Nr Instances 3
Nr Exposed 3
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.95(i)(2)(i): The employer did not ensure that hearing protectors are worn by an employee who is required by 29 CFR 1910.95(b)(1) to wear personal protective equipment: a) Edger runner: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 166.0% (equivalent to an 8 hour time weighted average TWA of 93.7 dBA) which is 1.66 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 411 minutes sampling period with a zero concentration assumption for the remaining 69 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were using hearing protection. b) Trimsaw operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 133.5% (equivalent to an 8 hour time weighted average TWA of 92.1 dBA) which is 1.33 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 390 minutes sampling period with a zero concentration assumption for the remaining 90 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were using hearing protection. c) Diverter operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 172.8% (equivalent to an 8 hour time weighted average TWA of 93.9 dBA) which is 1.72 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 378 minutes sampling period with a zero concentration assumption for the remaining 102 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were using hearing protection.
Citation ID 01002
Citaton Type Serious
Standard Cited 19100095 K01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-05
Nr Instances 5
Nr Exposed 5
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k). The employer did not institute a training program and ensure employee participation in the program. a) Planer operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 261.8% (equivalent to an 8 hour time weighted average TWA of 96.9 dBA) which is 2.618 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the planer area of the facility. Results were calculated for a 318 minutes sampling period with a zero concentration assumption for the remaining 162 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were provided with training on the effects of noise, purpose of hearing protection and audiometric testing. b) Edger operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 213.9% (equivalent to an 8 hour time weighted average TWA of 95.5 dBA) which is 2.13 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 371 minutes sampling period with a zero concentration assumption for the remaining 109 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were provided with training on the effects of noise, purpose of hearing protection and audiometric testing. c) Edger runner: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 166.0% (equivalent to an 8 hour time weighted average TWA of 93.7 dBA) which is 1.66 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 411 minutes sampling period with a zero concentration assumption for the remaining 69 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were provided with training on the effects of noise, purpose of hearing protection and audiometric testing. d) Trimsaw operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 133.5% (equivalent to an 8 hour time weighted average TWA of 92.1 dBA) which is 1.33 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 390 minutes sampling period with a zero concentration assumption for the remaining 90 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were provided with training on the effects of noise, purpose of hearing protection and audiometric testing. e) Diverter operator: On August 14, 2013 and at times prior; the employer exposed the employee to noise at levels of 172.8% (equivalent to an 8 hour time weighted average TWA of 93.9 dBA) which is 1.72 times the permissible exposure limit of 100 % (equivalent to an 8 hour TWA of 90 dBA) while working in the flooring plant at the facility. Results were calculated for a 378 minutes sampling period with a zero concentration assumption for the remaining 102 minutes. The employer failed to ensure employees with noise exposures over the Permissible Exposure Limit were provided with training on the effects of noise, purpose of hearing protection and audiometric testing.
Citation ID 01003
Citaton Type Serious
Standard Cited 19100133 A01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2700.0
Initial Penalty 5400.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment a) Sawmill area: On or about August 14, 2013 and at times prior, the employer fail to enforce the use of eye protection when employees were exposed to eye or face hazards from flying particles like wood chips and/or wood dust coming from the different saws cutting logs around the sawmill area.
Citation ID 01004
Citaton Type Serious
Standard Cited 19100151 C
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use. a) Sawmill Area: On or about August 14, 2013 and at times prior; employees using sodium hydroxide (corrosive chemical) to clean the radiators are not provided with a functional eye and body wash station.
Citation ID 01005
Citaton Type Serious
Standard Cited 19100242 B
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. a) On or about August 2, 2013 and at times prior; the employer exposed his employees to compressed air hazards in that employees were permitted to use compressed air that was not reduced to less than 30 psi for cleaning and/or blow off themselves.
Citation ID 01006A
Citaton Type Serious
Standard Cited 19100253 B02 II
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2700.0
Initial Penalty 5400.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons. a) Hose Making Area: On or about August 14, 2013 and at times prior; the employer exposed employees to struck by hazards in that employees were allowed to walk and work in the same area where cylinders were stored but were not secured to prevent the cylinders from being knocked over.
Citation ID 01006B
Citaton Type Serious
Standard Cited 19100253 B02 IV
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: a) Hose Making Area: On or about August 14, 2013 and at times prior; the employer exposed employees to fire / explosion hazards in that employees were allowed to walk and work in the hose making area next to cylinders without no caps in place.
Citation ID 01007A
Citaton Type Serious
Standard Cited 19101200 E01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2700.0
Initial Penalty 5400.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about August 14, 2013 and at times prior; the employer failed to develop, implement and maintain a Hazard communication program to protect employees from hazardous chemicals like but not limited to grinding fluids, welding gases (oxygen, acetylene, argon) and sodium hydroxide.
Citation ID 01007B
Citaton Type Serious
Standard Cited 19101200 F05 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein a) Planer Area: On or about August 14, 2013 and at times prior; employees were exposed to burns, inhalation, and/or fire hazards when the employer failed to ensure that a tank containing hydraulic oil were properly labeled with the chemical contained therein.
Citation ID 01007C
Citaton Type Serious
Standard Cited 19101200 F05 II
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings a) Planer Area: On or about August 14, 2013 and at times prior; employees were exposed to burns, inhalation, and/or fire hazards when the employer failed to ensure that a tank containing hydraulic oil were properly labeled the appropriate hazard warnings.
Citation ID 01007D
Citaton Type Serious
Standard Cited 19101200 H01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-05
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. a) On or about August 14, 2013 and at times prior; the employer exposed employees to chemical hazards in that employees were allowed to handle grinding fluid, sodium hydrosulfide (corrosive), oxygen, carbon dioxide, argon, acetylene, steam-co. ox treatment 1072 (sodium bisulfite), Steam-co. boiler treatment 1152, sodium hydroxide (corrosive) without being provided with hazard communication training.
339346462 0418600 2013-08-14 8575 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Planned
Scope Partial
Safety/Health Safety
Close Conference 2013-09-19
Emphasis L: FORKLIFT, N: AMPUTATE, P: AMPUTATE
Case Closed 2014-03-11

Related Activity
Type Inspection
Activity Nr 930842
Health Yes

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 5A0001
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crush-by hazards: a) Throughout the yard; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to struck-by and crush-by hazards in that employees were permitted to operate powered industrial trucks without being provided with and required to wear seatbelts.
Citation ID 01002
Citaton Type Serious
Standard Cited 19100022 A02
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 1350.0
Initial Penalty 2700.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
Gravity 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: a) Boilers; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to slip and trip hazards in that employees were required to walk and work in standing water at the boilers area.
Citation ID 01003A
Citaton Type Serious
Standard Cited 19100147 C04 II B
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-04
Nr Instances 5
Nr Exposed 6
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) Planer Mill - planer; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control the 480 VAC 3-phase electrical and 650 psi hydraulic energies when employees are clearing jams and cleaning around, under, and in the machine. b) Planer Mill - trim saw; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control the 115 psi pneumatic energy when employees are cleaning under and performing maintenance on the machine. c) Planer Mill - sorter; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control the 115 psi pneumatic energy when employees are cleaning/clearing lumber and sawdust from underneath the machine. d) Planer Mill - stacker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the machine specific procedure did not specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control the 115 psi pneumatic energy when employees are cleaning sticks of wood and debris from underneath the machine. e) Sawmill - debarker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control the 480 V electrical, 30 psi pneumatic, and 60 psi hydraulic energies when employees are performing maintenance/repairs on the equipment.
Citation ID 01003B
Citaton Type Serious
Standard Cited 19100147 C04 II C
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 5
Nr Exposed 9
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them: a) Planer Mill - planer; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical and hydraulic) and struck-by and caught-in hazards in that the machine specific procedure did not outline the steps for placement, removal and transfer of lockout or tagout devices when clearing jams and cleaning around, under, and in the machine. b) Planer Mill - trim saw; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical and pneumatic) and struck-by and caught-in hazards in that the machine specific procedure did not outline the steps for placement, removal and transfer of lockout or tagout devices when cleaning under and performing maintenance on the machine. c) Planer Mill - sorter; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the machine specific procedure did not outline the steps for placement, removal and transfer of lockout or tagout devices when cleaning/clearing lumber and sawdust from underneath the machine. d) Planer Mill - stacker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the machine specific procedure did not outline the steps for placement, removal and transfer of lockout or tagout devices when cleaning sticks of wood and debris from underneath the machine. e) Sawmill - debarker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the machine specific procedure did not outline the steps for placement, removal and transfer of lockout or tagout devices when maintenance/repairs were being performed on the debarker.
Citation ID 01003C
Citaton Type Serious
Standard Cited 19100147 C04 II D
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 5
Nr Exposed 9
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control: a) Planer Mill - planer; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not contain the specific requirements for testing the machine or equipment to determine and verify the effectiveness of lockout devices for the 480 VAC 3-phase electrical and 650 psi hydraulic energies that were present on the equipment. b) Planer Mill - trim saw; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not contain the specific requirements for testing the machine or equipment to determine and verify the effectiveness of lockout devices for the 480 VAC 3-phase electrical and 115 psi pneumatic energies that were present on the equipment. c) Planer Mill - sorter; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not contain the specific requirements for testing the machine or equipment to determine and verify the effectivenes of lockout devices for the 480 VAC 3-phase electrical, 115 psi pneumatic, and 1250 psi hydraulic energies that were present on the equipment. d) Planer Mill - stacker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not contain the specific requirements for testing the machine or equipment to determine and verify the effectiveness of lockout devices for the 480 VAC 3-phase electrical, 115 psi pneumatic, and 1250 psi hydraulic energies that were present on the equipment. e) Sawmill - debarker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies and struck-by and caught-in hazards in that the machine specific procedure did not contain the specific requirements for testing the machine or equipment to determine and verify the effectiveness of lockout devices for the 480 V electrical, 30 psi pneumatic, and 60 psi hydraulic energies that were present on the machine.
Citation ID 01004
Citaton Type Serious
Standard Cited 19100147 C05 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-04
Nr Instances 4
Nr Exposed 5
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources: a) Planer Mill - planer; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical and hydraulic) and struck-by and caught-in hazards in that the employer had not provided locks for employees to use to lock out the planer prior to clearing jams and cleaning in/around/under the planer so the machine could not be accidentally started. b) Planer Mill - trim saw; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical and pneumatic) and struck-by and caught-in hazards in that the employer had not provided locks for employees to use to lock out the trim saw prior to cleaning under the trim saw so the machine could not be accidentally started. c) Planer Mill - sorter; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the employer had not provided locks for employees to use to lock out the sorter prior to clearing debris and cleaning underneath the sorter so the machine could not be accidentally started. d) Planer Mill - stacker; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to hazardous energies (including electrical, pneumatic, and hydraulic) and struck-by and caught-in hazards in that the employer had not provided locks for employees to use to lock out the stacker prior to cleaning under the stacker so the machine could not be accidentally started.
Citation ID 01005
Citaton Type Serious
Standard Cited 19100147 C07 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-04
Nr Instances 2
Nr Exposed 8
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) Throughout the sawmill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to potential hazardous energy(s) and caught-in and struck-by hazards in that authorized, affected, and other employees had not been provided with the level of training required that ensures that the purpose and function of the energy control program and the knowledge and skills required for the safe application, usage, and removal of the energy control device(s) were acquired by the employees. b) Throughout the Planer mill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to potential hazardous energy(s) and caught-in and struck-by hazards in that authorized, affected, and other employees had not been provided with the level of training required that ensures that the purpose and function of the energy control program and the knowledge and skills required for the safe application, usage, and removal of the energy control device(s) were acquired by the employees.
Citation ID 01006
Citaton Type Serious
Standard Cited 19100157 G01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 1912.5
Initial Penalty 3825.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 50
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.157(g)(1): Where the employer has provided portable fire extinguishers for employee use in the workplace, the employer did not provide an educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) Throughout the facility (sawmill, planer mill, forklifts in yard); On or about August 14, 2013 and at times prior thereto, the employer exposed employees to the hazards of fighting incipent stage fire without training the employees on how to adequately use the extinguishers and the hazards involved with incipent stage fire fighting.
Citation ID 01007
Citaton Type Serious
Standard Cited 19100213 G01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.213(g)(1): Swing cutoff saw(s) were not provided with an automatically adjusting hood that completely enclosed the upper half of the saw, the arbor end, and the point of operation at all positions of the saw: a) Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation hazards in that employees were permitted to operate a chopsaw (swing saw) that had the left-side of the guard removed exposing the entire left-side of the blade. The lower blade guard had also been removed.
Citation ID 01008A
Citaton Type Serious
Standard Cited 19100219 D01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 1912.5
Initial Penalty 3825.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation hazards in that employees were permitted to operate a chopsaw (swing saw) with unguarded pulleys.
Citation ID 01008B
Citaton Type Serious
Standard Cited 19100219 E03 I
Issuance Date 2014-02-11
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation hazards in that employees were permitted to operate a chopsaw (swing saw) with an unguarded inclined belt.
Citation ID 01009
Citaton Type Serious
Standard Cited 19100265 C04 IV
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 3
Nr Exposed 20
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.265(c)(4)(iv): Elevated walk(s), runway(s), and platform(s) 4 feet or more from the floor level, were not provided with a standard railing: a) Sawmill (sorter area); On or about August 14, 2013 and at times prior thereto, the employer exposed employees to fall hazards up to 17'-1" in that employees were allowed to work on an elevated platform while unjamming lumber at the sorter that did not have standard railing. b) Sawmill (debarker area); On or about August 14, 2013 and at times prior thereto, the employer exposed employees to fall hazards up to 6'-3" in that employees were allowed to walk/work on an elevated walkway that did not have standard railing. Two sections of the walkway were unguarded: along the debarker itself and at the bottom of the stairs leading to the debarker. c) Sawmill (gangsaw); On or about August 14, 2013 and at times prior thereto, the employer exposed employees to fall hazards up to 6'-3"in that employees were allowed to walk/work on an elevated work platform at the gangsaw that did not have standard railing.
Citation ID 01010
Citaton Type Serious
Standard Cited 19100265 C18 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-04
Nr Instances 4
Nr Exposed 7
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.265(c)(18)(i): Construction, operation, and maintenance of conveyors were not in accordance with American National Standard B20.1-1957, which is incorporated by reference as specified in Sec. 1910.6. Section 602 Pulleys, Sprockets, Sheaves, Drums, Blocks, states that all of these when located in working area where operators (other than maintenance men) are present, shall be arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt and pulley, chain and sprocket, or cable and sheave, drum or block. a) Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation/caught-in hazards in that employees were required to work within 1' of an unguarded chain and sprocket at the grader table conveyor. b) Sawmill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation/caught-in hazards in that employees were allowed to work within 2'-3' of exposed rotating chains and sprockets at the outfeed roll case. c) Sawmill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation/caught-in hazards in that employees were allowed to work within 1'-3' of exposed rotating chains, sprockets, and shafts at the debarker. d) Sawmill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to amputation/caught-in hazards in that employees were allowed to work within 1'-3' of exposed rotating chains, sprockets, and shafts at the re-entry roll case.
Citation ID 01011
Citaton Type Serious
Standard Cited 19100303 B07 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.303(b)(7)(i): Unused openings in electrical cabinets were not effectively closed to provide substantially equivalent to wall of the equipment: a) Planer Mill - Electrical panel for planer and fan; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to potential electrical shock hazards in that employees were allowed to access an electrical panel (480 VAC 3-phase) where unused openings were not effectively closed.
Citation ID 01012
Citaton Type Serious
Standard Cited 19100303 G02 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 3150.0
Initial Penalty 6300.0
Final Order 2014-03-04
Nr Instances 4
Nr Exposed 9
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.303(g)(2)(i): Live parts of electrical equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or other means listed under this provision: a) Planer Mill - Variable speed drive for planer; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were required to access equipment and/or circuits which were energized (480 VAC 3-phase) and not guarded against accidental contact. b) Planer Mill - (VFD) Variable Frequency Drive speed drive for feed system at planer; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were required to access equipment and/or circuits which were energized (480 VAC 3-phase) and not guarded against accidental contact. c) Sawmill - Starter for chipper head; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were allowed to walk/work around equipment and/or circuits which were energized (480 VAC 3-phase) and not guarded against accidental contact. d) Sawmill - Electrical panel for lights; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were required to access equipment and/or circuits which were energized (480 VAC 3-phase) and not guarded against accidental contact.
Citation ID 01013
Citaton Type Serious
Standard Cited 19100332 B01
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 2
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments: a) Electrical panel in Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were allowed to access equipment and/or circuits which were energized (480 VAC 3-phase) to change out fuses without first receiving training in safety - related work practices (electrical lockout tagout and use of testing equipment) to be employed to prevent electrical shock or other injuries from direct or indirect electrical contact. b) Trim saw in Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that employees were allowed to access equipment and/or circuits which were energized (480 VAC 3-phase) to unwire and rewire equipment without first receiving training in electrical safety - related work practices (electrical lockout tagout and use of testing equipment) to be employed to prevent electrical shock or other injuries from direct or indirect electrical contact.
Citation ID 01014
Citaton Type Serious
Standard Cited 19100333 C02
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 2250.0
Initial Penalty 4500.0
Final Order 2014-03-04
Nr Instances 2
Nr Exposed 1
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.333(c)(2): The employer did not ensure that only qualified persons were working on energized circuits and that qualified persons were familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools: a) Electrical panel in Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that unqualified employees were allowed to access equipment and/or circuits which were energized (480 VAC 3-phase) while changing out fuses in the planer mill electrical panel. b) Trim saw motor in Planer Mill; On or about August 14, 2013 and at times prior thereto, the employer exposed his employees to electrical hazards in that unqualified employees were allowed to access equipment and/or circuits which were energized (480 VAC 3-phase) while rewiring the trim saw motor.
Citation ID 02001
Citaton Type Other
Standard Cited 19100134 C02 I
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) Boilers; On or about August 14, 2013 and at times prior thereto, the employer allowed employees to voluntarily wear filtering face piece respirators (dust masks) without providing them with Appendix D of the Respiratory Protection Standard.
Citation ID 02002
Citaton Type Other
Standard Cited 19100146 C02
Issuance Date 2014-02-11
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.146(c)(2): The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces: a) Boilers; On or about August 14, 2013 and at times prior thereto, the employer did not post danger signs or any other type of labeling indicating that the boilers were permit required confined spaces (classified as such by the employer).
Citation ID 02003
Citaton Type Other
Standard Cited 19100151 B
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 60
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.151(b): In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for the treatment of all injured employees, a person or persons were not adequately trained to render first aid. Adequate first aid supplies shall be readily available. a) Throughout the facility; On or about August 14, 2013 and at times prior thereto, the employer failed to adequately train employees in CPR/first aid when the nearest clinic and hosptial was not in near proximity to the facility.
Citation ID 02004
Citaton Type Other
Standard Cited 19100178 L06
Issuance Date 2014-02-11
Abatement Due Date 2014-02-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 2
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) Thoughout the yard; On or about August 14, 2013 and at times prior thereto, the employer permitted employees to operate powered industrial trucks in the sawmill, planer mill, and yard prior to certifying that each operator had been trained and evaluated as required by the regulation.
Citation ID 02005
Citaton Type Other
Standard Cited 19100305 B02 I
Issuance Date 2014-02-11
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-03-04
Nr Instances 1
Nr Exposed 20
FTA Current Penalty 0.0
Citation text line 29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Sawmill; On or about August 14, 2013 and at times prior thereto, the employer exposed employees to electrical hazards in that employees were allowed to walk/work around a 110 volt electrical outlet that did not have a cover over the exposed wiring.
307105288 0418600 2004-03-09 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Planned
Scope Partial
Safety/Health Safety
Close Conference 2004-03-10
Emphasis N: AMPUTATE, S: AMPUTATIONS
Case Closed 2004-09-02

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 19100023 C01
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 1
Gravity 01
Citation ID 01002
Citaton Type Serious
Standard Cited 19100038 A05 III
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Current Penalty 750.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 1
Gravity 01
Citation ID 01003
Citaton Type Serious
Standard Cited 19100133 A01
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Current Penalty 1350.0
Initial Penalty 2500.0
Nr Instances 3
Nr Exposed 3
Gravity 10
Citation ID 01004A
Citaton Type Serious
Standard Cited 19100147 C04 I
Issuance Date 2004-05-14
Abatement Due Date 2004-07-01
Current Penalty 2500.0
Initial Penalty 2500.0
Nr Instances 1
Nr Exposed 2
Gravity 10
Citation ID 01004B
Citaton Type Serious
Standard Cited 19100147 C04 IIB
Issuance Date 2004-05-14
Abatement Due Date 2004-07-01
Nr Instances 4
Nr Exposed 2
Gravity 10
Citation ID 01005
Citaton Type Serious
Standard Cited 19100147 C07 IIIB
Issuance Date 2004-05-14
Abatement Due Date 2004-07-01
Current Penalty 525.0
Initial Penalty 525.0
Nr Instances 1
Nr Exposed 2
Gravity 01
Citation ID 01006
Citaton Type Serious
Standard Cited 19100265 C03 III
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Current Penalty 525.0
Initial Penalty 525.0
Nr Instances 1
Nr Exposed 2
Gravity 01
Citation ID 01007
Citaton Type Serious
Standard Cited 19100265 C04 IV
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Initial Penalty 2500.0
Nr Instances 2
Nr Exposed 1
Gravity 10
Citation ID 01008A
Citaton Type Serious
Standard Cited 19100023 C01
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Current Penalty 1550.0
Nr Instances 1
Nr Exposed 1
Gravity 01
Citation ID 01008B
Citaton Type Serious
Standard Cited 19100265 C04 IV
Issuance Date 2004-05-14
Abatement Due Date 2004-06-03
Nr Instances 2
Nr Exposed 1
Gravity 10
Citation ID 02001
Citaton Type Other
Standard Cited 19100147 C06 I
Issuance Date 2004-05-14
Abatement Due Date 2004-07-01
Nr Instances 1
Nr Exposed 2
Gravity 01
106095102 0418600 1995-08-10 HWY 280 EAST, SALEM, AL, 36874
Inspection Type FollowUp
Scope Partial
Safety/Health Safety
Close Conference 1995-08-10
Case Closed 1995-10-03

Related Activity
Type Inspection
Activity Nr 106101389
106101389 0418600 1995-03-02 HWY 280 EAST, SALEM, AL, 36874
Inspection Type Accident
Scope Complete
Safety/Health Safety
Close Conference 1995-03-08
Case Closed 1995-06-20

Related Activity
Type Accident
Activity Nr 361984545

Violation Items
Citation ID 01001
Citaton Type Serious
Standard Cited 19100023 A02
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 1
Gravity 01
Citation ID 01002
Citaton Type Serious
Standard Cited 19100024 H
Issuance Date 1995-05-23
Abatement Due Date 1995-05-31
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 5
Nr Exposed 10
Gravity 01
Citation ID 01003
Citaton Type Serious
Standard Cited 19100038 A01
Issuance Date 1995-05-23
Abatement Due Date 1995-06-16
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 55
Gravity 01
Citation ID 01004
Citaton Type Serious
Standard Cited 19100106 B02 VIIA
Issuance Date 1995-05-23
Abatement Due Date 1995-06-25
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 2
Nr Exposed 5
Gravity 01
Citation ID 01005A
Citaton Type Serious
Standard Cited 19100132 D01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-26
Current Penalty 1250.0
Initial Penalty 2500.0
Nr Instances 1
Related Event Code (REC) Accident
Gravity 10
Citation ID 01005B
Citaton Type Serious
Standard Cited 19100146 D04 IV
Issuance Date 1995-05-23
Abatement Due Date 1995-05-26
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Accident
Gravity 01
Citation ID 01006A
Citaton Type Serious
Standard Cited 19100146 C01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-26
Current Penalty 1250.0
Initial Penalty 2500.0
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Accident
Gravity 10
Citation ID 01006B
Citaton Type Serious
Standard Cited 19100146 D02
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Accident
Gravity 01
Citation ID 01006C
Citaton Type Serious
Standard Cited 19100146 G01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-27
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Accident
Gravity 01
Citation ID 01007
Citaton Type Serious
Standard Cited 19100146 C04
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 1250.0
Initial Penalty 2500.0
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Accident
Gravity 10
Citation ID 01008A
Citaton Type Serious
Standard Cited 19100147 C01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-31
Current Penalty 625.0
Initial Penalty 1250.0
Nr Instances 1
Nr Exposed 3
Gravity 03
Citation ID 01008B
Citaton Type Serious
Standard Cited 19100147 C04 I
Issuance Date 1995-05-23
Abatement Due Date 1995-05-31
Nr Instances 1
Nr Exposed 3
Gravity 01
Citation ID 01008C
Citaton Type Serious
Standard Cited 19100147 C07 I
Issuance Date 1995-05-23
Abatement Due Date 1995-05-31
Nr Instances 1
Nr Exposed 3
Gravity 01
Citation ID 01009
Citaton Type Serious
Standard Cited 19100147 D04 I
Issuance Date 1995-05-23
Abatement Due Date 1995-05-27
Current Penalty 625.0
Initial Penalty 1250.0
Nr Instances 1
Nr Exposed 3
Gravity 03
Citation ID 01010
Citaton Type Serious
Standard Cited 19100178 P01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 500.0
Initial Penalty 1000.0
Nr Instances 2
Nr Exposed 2
Gravity 02
Citation ID 01011A
Citaton Type Serious
Standard Cited 19100219 D01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 500.0
Initial Penalty 1000.0
Nr Instances 1
Nr Exposed 1
Gravity 02
Citation ID 01011B
Citaton Type Serious
Standard Cited 19100219 E01 I
Issuance Date 1995-05-23
Abatement Due Date 1995-05-27
Nr Instances 1
Nr Exposed 1
Gravity 01
Citation ID 01012
Citaton Type Serious
Standard Cited 19100219 F03
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 2
Nr Exposed 2
Gravity 01
Citation ID 01013A
Citaton Type Serious
Standard Cited 19101200 E01
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Current Penalty 375.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 5
Gravity 01
Citation ID 01013B
Citaton Type Serious
Standard Cited 19101200 F05 I
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Nr Instances 1
Nr Exposed 2
Gravity 01
Citation ID 01013C
Citaton Type Serious
Standard Cited 19101200 F05 II
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Nr Instances 1
Nr Exposed 2
Gravity 01
Citation ID 01013D
Citaton Type Serious
Standard Cited 19101200 G08
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Nr Instances 1
Nr Exposed 5
Gravity 01
Citation ID 01013E
Citaton Type Serious
Standard Cited 19101200 H
Issuance Date 1995-05-23
Abatement Due Date 1995-05-28
Nr Instances 1
Nr Exposed 5
Gravity 01
Citation ID 02001
Citaton Type Other
Standard Cited 19100180 D06
Issuance Date 1995-05-23
Abatement Due Date 1995-05-27
Nr Instances 1
Nr Exposed 1
Gravity 01

Paycheck Protection Program

Loan Number Loan Funded Date SBA Origination Office Code Loan Delivery Method Borrower Street Address
6207687004 2020-04-06 0459 PPP 8575 US HIGHWAY 280 E, SALEM, AL, 36874-2009
Loan Status Date 2021-05-15
Loan Status Paid in Full
Loan Maturity in Months 24
SBA Guaranty Percentage 100
Loan Approval Amount (at origination) 1118200
Loan Approval Amount (current) 1118200
Undisbursed Amount 0
Franchise Name -
Lender Location ID 440693
Servicing Lender Name River Bank & Trust
Servicing Lender Address 2611 Legends Dr, PRATTVILLE, AL, 36066-7761
Rural or Urban Indicator U
Hubzone N
LMI N
Business Age Description Existing or more than 2 years old
Project Address SALEM, LEE, AL, 36874-2009
Project Congressional District AL-03
Number of Employees 100
NAICS code 321113
Borrower Race Unanswered
Borrower Ethnicity Unknown/NotStated
Business Type Subchapter S Corporation
Originating Lender ID 440693
Originating Lender Name River Bank & Trust
Originating Lender Address PRATTVILLE, AL
Gender Unanswered
Veteran Unanswered
Forgiveness Amount 1129195.63
Forgiveness Paid Date 2021-03-31

Motor Carrier Census

USDOT Number Carrier Operation MCS-150 Form Date MCS-150 Mileage MCS-150 Year Power Units Drivers Operation Classification
708552 Interstate 2025-02-12 990128 2024 25 13 Private(Property)
Legal Name DUDLEY LUMBER COMPANY INC
DBA Name -
Physical Address 8575 US HIGHWAY 280 EAST, SALEM, AL, 36874, US
Mailing Address PO BOX 7, SALEM, AL, 36874, US
Phone (334) 745-4695
Fax (334) 745-4695
E-mail CROBERTS@DUDLEYLUMBER.NET

Safety Measurement System - All Transportation
Total Number of Inspections for the measurement period (24 months) 21
Driver Fitness BASIC Serious Violation Indicator No
Vehicle Maintenance BASIC Acute/Critical Indicator No
Unsafe Driving BASIC Acute/Critical Indicator No
Driver Fitness BASIC Roadside Performance measure value 1.09
Hours-of-Service (HOS) Compliance BASIC Roadside Performance measure value .65
Total Number of Driver Inspections for the measurment period 21
Vehicle Maintenance BASIC Roadside Performance measure value 4.11
Total Number of Vehicle Inspections for the measurement period 12
Controlled Substances and Alcohol BASIC Roadside Performance measure value 0
Unsafe Driving BASIC Roadside Performance Measure Value .2
Number of inspections with at least one Driver Fitness BASIC violation 2
Number of inspections with at least one Hours-of-Service BASIC violation 4
Total Number of Driver Inspections containing at least one Driver Out-of-Service Violation 1
Number of inspections with at least one Vehicle Maintenance BASIC violation 9
Total Number of Vehicle Inspections containing at least one Vehicle Out-of-Service violation 3
Number of inspections with at least one Controlled Substances and Alcohol BASIC violation 0
Number of inspections with at least one Unsafe Driving BASIC violation 1

Inspections
Unique report number of the inspection CV41014748
State abbreviation that indicates the state the inspector is from KY
The date of the inspection 2024-10-08
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred KY
Time weight of the inspection 3
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203630
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X3KJ233245
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit FONA
License plate of the secondary unit A068122
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 5TR14830482001156
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 3686005218
State abbreviation that indicates the state the inspector is from FL
The date of the inspection 2024-08-20
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred FL
Time weight of the inspection 3
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KENWORTH
License plate of the main unit 1203631
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X7KJ233247
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit BENSON TRU
License plate of the secondary unit A068111
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1NUFT28ZXVMNA0202
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection CDJP003802
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2024-06-11
ID that indicates the level of inspection Full
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 2
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit STRAIGHT TRUCK
Description of the make of the main unit FRHT
License plate of the main unit 1203635
License state of the main unit AL
Vehicle Identification Number of the main unit 1FUJGLBGXCSBH9983
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 3
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 3
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection JJEG000702
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2024-03-28
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 2
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit FRHT
License plate of the main unit 1203635
License state of the main unit AL
Vehicle Identification Number of the main unit 1FUJGLBGXCSBH9983
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection JLUA010477
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2024-03-08
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 2
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203630
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X3KJ233245
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit GDAN
License plate of the secondary unit A067624
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1GRDM9025GM000502
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 1
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 1
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection MLCV008923
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-11-16
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1116404
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPHD49X7BD110813
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit BENS
License plate of the secondary unit 43A2CW0
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 5DMFABTB11M000482
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection JJCV008987
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-10-02
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203630
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X3KJ233245
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit UTIL
License plate of the secondary unit A067626
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1UYFS2459HA691106
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1928000922
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-08-24
ID that indicates the level of inspection Full
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 1
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 1
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203631
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X7KJ233247
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit CHAM
License plate of the secondary unit A067784
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1C92F482X7M949220
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 3
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 3
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection CDJP003426
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-08-15
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1174848
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD40X6HJ164153
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit FOUN
License plate of the secondary unit A068122
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 5TR14830482001156
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 3
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 2
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 1
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection MLCV008439
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-08-08
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1188248
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPHD49X8DD191386
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit ONEI
License plate of the secondary unit A068112
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1NUFT28Z9VMNA0157
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1170003095
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-07-31
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203625
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPHD49X5BD110826
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit DORS
License plate of the secondary unit A067634
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1DTP86Z22XG053564
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 4
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 1
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 3
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1299002497
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-07-20
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 1
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 1
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203632
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPCD49X7MD739887
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit TRAO
License plate of the secondary unit A067786
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1TTF482C7C3652951
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 1
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 1
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection DWMC005701
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-07-01
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 1
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 1
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1174848
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD40X6HJ164153
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 2
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 2
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 0151003419
State abbreviation that indicates the state the inspector is from GA
The date of the inspection 2023-06-21
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred GA
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203625
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPHD49X5BD110826
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit DORS
License plate of the secondary unit A067634
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1DTP86Z22XG053564
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 4
Number of Unsafe Driving BASIC violations 1
Number of Hours-of-Service Compliance BASIC violations 3
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection CDJP003313
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-05-31
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203623
License state of the main unit AL
Vehicle Identification Number of the main unit 1XP7D49X56D895799
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit WANC
License plate of the secondary unit A068126
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1LJK48270VL412603
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 1
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 1
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 3216006585
State abbreviation that indicates the state the inspector is from FL
The date of the inspection 2023-05-24
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred FL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203632
License state of the main unit AL
Vehicle Identification Number of the main unit 1XPCD49X7MD739887
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit TRAO
License plate of the secondary unit A067786
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1TTF482C7C3652951
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection TSAV000794
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-05-19
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit PTRB
License plate of the main unit 1203623
License state of the main unit AL
Vehicle Identification Number of the main unit 1XP7D49X56D895799
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit WANC
License plate of the secondary unit A068126
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1LJK48270VL412603
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 1
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 1
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1219004496
State abbreviation that indicates the state the inspector is from GA
The date of the inspection 2023-03-02
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred GA
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit FRHT
License plate of the main unit 1179857
License state of the main unit AL
Vehicle Identification Number of the main unit 3AKJGLBG6DSBS7061
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit ONEI
License plate of the secondary unit A068112
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1NUFT28Z9VMNA0157
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection APCV001239
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-03-29
ID that indicates the level of inspection Driver-Only
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1174848
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD40X6HJ164153
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1928000435
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-03-24
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203629
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X1KJ233244
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit DORS
License plate of the secondary unit A068187
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 2DTV75T25VA252762
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 0
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 0
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection 1394000125
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-03-08
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203629
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X1KJ233244
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit PERL
License plate of the secondary unit A067764
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 1PLE0452X1PH52128
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 1
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 1
Number of Hazardous Materials Compliance BASIC violations 0
Unique report number of the inspection JSBH006748
State abbreviation that indicates the state the inspector is from AL
The date of the inspection 2023-02-22
ID that indicates the level of inspection Walk-around
State abbreviation that indicates where the inspection occurred AL
Time weight of the inspection 1
Number of Out-Of-Service violations related to Driver 0
Number of Out-Of-Service violations related to vehicle 0
Number of violations related to Hazardous Materials 0
Total number of Out-Of-Service violations 0
Total number of Out-Of-Service violations related to Hazardous Materials 0
Description of the type of the main unit TRUCK TRACTOR
Description of the make of the main unit KW
License plate of the main unit 1203627
License state of the main unit AL
Vehicle Identification Number of the main unit 1XKZD49X8KJ233242
Description of the type of the secondary unit SEMI-TRAILER
Description of the make of the secondary unit FONA
License plate of the secondary unit A068121
License state of the secondary unit AL
Vehicle Identification Number of the secondary unit 5TR14830X82001226
Unsafe Driving BASIC inspection Y
Hours-of-Service Compliance BASIC inspection Y
Driver Fitness BASIC inspection Y
Controlled Substances/Alcohol BASIC inspection Y
Vehicle Maintenance BASIC inspection Y
Total number of BASIC violations 2
Number of Unsafe Driving BASIC violations 0
Number of Hours-of-Service Compliance BASIC violations 0
Number of Driver Fitness BASIC violations 0
Number of Controlled Substances/Alcohol BASIC violations 0
Number of Vehicle Maintenance BASIC violations 2
Number of Hazardous Materials Compliance BASIC violations 0

Violations
The date of the inspection 2023-02-22
Code of the violation 3939
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 2
The time weight that is assigned to a violation 1
The description of a violation Inoperable Required Lamp
The description of the violation group Clearance Identification Lamps/Other
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-08-24
Code of the violation 39353B
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 4
The time weight that is assigned to a violation 1
The description of a violation CMV manufactured after 10/19/94 has an automatic airbrake adjustment system that fails to compensate for wear
The description of the violation group Brakes All Others
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-08-24
Code of the violation 39347E
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 4
The time weight that is assigned to a violation 1
The description of a violation Brake Out of Adjustment - Roto Clamp (Short & Long) DD-3 or Bolt
The description of the violation group Brakes Out of Adjustment
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2024-03-08
Code of the violation 39522G
Name of the BASIC Hours-of-Service Compliance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 2
The description of a violation Portable ELD not mounted in a fixed position and visible to driver
The description of the violation group EOBR Related
The unit a violation is cited against Driver
The date of the inspection 2023-08-24
Code of the violation 3963A1BOS
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation Y
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 2
The severity weight that is assigned to a violation 0
The time weight that is assigned to a violation 1
The description of a violation BRAKES OUT OF SERVICE: The number of defective brakes is equal to or greater than 20 percent of the service brakes on the vehicle or combination
The description of the violation group Brake Out Of Service
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-08-15
Code of the violation 39395A
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 2
The time weight that is assigned to a violation 1
The description of a violation No/discharged/unsecured fire extinguisher
The description of the violation group Emergency Equipment
The unit a violation is cited against Vehicle main unit
The date of the inspection 2023-08-15
Code of the violation 39141A1NPH
Name of the BASIC Driver Fitness
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 1
The description of a violation Operating a property-carrying vehicle without possessing a valid medical certificate - no previous history
The description of the violation group Medical Certificate
The unit a violation is cited against Driver
The date of the inspection 2023-08-15
Code of the violation 38371H
Name of the BASIC Driver Fitness
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 1
The description of a violation Failing to submit medical certification documentation as required
The description of the violation group Medical Certificate
The unit a violation is cited against Driver
The date of the inspection 2023-03-08
Code of the violation 39617C
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 4
The time weight that is assigned to a violation 1
The description of a violation Operating a CMV without proof of a periodic inspection
The description of the violation group Inspection Reports
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-06-21
Code of the violation 39524D
Name of the BASIC Hours-of-Service Compliance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 3
The time weight that is assigned to a violation 1
The description of a violation ELD cannot transfer ELD records electronically
The description of the violation group Fail to transfer ELD records
The unit a violation is cited against Driver
The date of the inspection 2023-07-31
Code of the violation 39345DLUV
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 4
The time weight that is assigned to a violation 1
The description of a violation Brake Connections with Leaks Under Vehicle
The description of the violation group Brakes All Others
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-07-20
Code of the violation 393118
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation Y
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 2
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 1
The description of a violation No/improper lumber/building materials securement
The description of the violation group General Securement
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-07-01
Code of the violation 3939TS
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation Y
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 2
The severity weight that is assigned to a violation 6
The time weight that is assigned to a violation 1
The description of a violation Inoperative turn signal
The description of the violation group Lighting
The unit a violation is cited against Vehicle main unit
The date of the inspection 2023-06-21
Code of the violation 39522H2
Name of the BASIC Hours-of-Service Compliance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 1
The description of a violation Driver failing to maintain ELD instruction sheet
The description of the violation group EOBR Related
The unit a violation is cited against Driver
The date of the inspection 2023-06-21
Code of the violation 39522H1
Name of the BASIC Hours-of-Service Compliance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 1
The time weight that is assigned to a violation 1
The description of a violation Driver failing to maintain ELD user's manual
The description of the violation group EOBR Related
The unit a violation is cited against Driver
The date of the inspection 2023-06-21
Code of the violation 3922FC
Name of the BASIC Unsafe Driving
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 5
The time weight that is assigned to a violation 1
The description of a violation Following too close
The description of the violation group Dangerous Driving
The unit a violation is cited against Driver
The date of the inspection 2023-05-31
Code of the violation 39375C
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 8
The time weight that is assigned to a violation 1
The description of a violation Tire-other tread depth less than 2/32 of inch measured in a major tread groove
The description of the violation group Tires
The unit a violation is cited against Vehicle secondary unit
The date of the inspection 2023-05-19
Code of the violation 393205C
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 2
The time weight that is assigned to a violation 1
The description of a violation Wheel fasteners loose and/or missing
The description of the violation group Wheels Studs Clamps Etc.
The unit a violation is cited against Vehicle main unit
The date of the inspection 2023-02-22
Code of the violation 39311TL
Name of the BASIC Vehicle Maintenance
The violation is identified as Out-Of-Service violation N
The weight that is assigned to a violation if it's identified as an Out-Of-Service violation 0
The severity weight that is assigned to a violation 3
The time weight that is assigned to a violation 1
The description of a violation Truck-Tractor lower rear mud flaps retroreflective sheeting / reflex reflective material requirements for vehicles manufactured after July 1997
The description of the violation group Reflective Sheeting
The unit a violation is cited against Vehicle main unit

Crashes
Unique state report number for the incident AL0003666236
Sequence number for each vehicle involved in a crash 1
The date a incident occurred 2023-06-19
State abbreviation AL
Total number of fatalities reported in the crash 0
Total number of injuries reported in the crash 0
The vehicle involved in the accident was towed from the scene Y
Hazardous materials were released during the accident N
Description of the trafficway Two-Way Trafficway Divided Positive Barrier
Description of the access control Full Control
Description of the road surface condition Wet
Description of the weather condition Rain
Description of the light condition Daylight
Vehicle Identification number (VIN) 1XKZD49X1KJ233244
Vehicle license number 1203629
Vehicle license state AL
The severity weight that is assigned to the incident 1
The time weight that is assigned to the incident 1
Sequence number 1
Unique state report number for the incident AL0003615734
Sequence number for each vehicle involved in a crash 1
The date a incident occurred 2023-02-10
State abbreviation AL
Total number of fatalities reported in the crash 0
Total number of injuries reported in the crash 0
The vehicle involved in the accident was towed from the scene Y
Hazardous materials were released during the accident N
Description of the trafficway Two-Way Trafficway Not Divided
Description of the access control No Control
Description of the road surface condition Wet
Description of the weather condition Rain
Description of the light condition Dark - Lighted
Vehicle Identification number (VIN) 1XKZD40X0HJ164150
Vehicle license number IRP23045
Vehicle license state AL
The severity weight that is assigned to the incident 1
The time weight that is assigned to the incident 1
Sequence number 1

Related by officers

DUDLEY, JOHN ROBERT

Dudley Land and Timber Company, Inc. Southeastern Lumber Manufacturers of Alabama Association, Inc. East Alabama Medical Center Foundation Dudley Development Company, Inc. Opelika Wood Products, Inc.

DUDLEY, BERRY C

Choice Realty, Inc. Dudley Land and Timber Company, Inc. Opelika Wood Products, Inc.

DUDLEY, MARTHA S

Dudley Land and Timber Company, Inc.

DUDLEY, CAROLYN P

Dudley Land and Timber Company, Inc.

MASSINGILL, VICKI DUDLEY

East Alabama Lumber Co., Inc.

Related by address

602 SOUTH 7TH STREETOPELIKA, AL 36803

East Alabama Lumber Co., Inc. JRD Family, LLC JRBC Management, LLC BCD Family, LLC JRBC Holdings, LLC

Date of last update: 30 Jul 2024

Sources: Alabama Secretary of State

Privacy policy Policy
About us About us
Contacts Contact us

© 2025 alorgs.com, Part of Big Data Integrated