347105355
|
0418600
|
2023-11-13
|
1151 OLD COLUMBUS ROAD, OPELIKA, AL, 36804
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Health
|
Close Conference |
2023-11-15
|
Emphasis |
N: DUSTEXPL, N: RCS-NEP
|
Case Closed |
2024-05-28
|
Related Activity
Type |
Referral |
Activity Nr |
2101455 |
Health |
Yes |
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19100022 A01 |
Issuance Date |
2024-03-25 |
Abatement Due Date |
2024-04-22 |
Current Penalty |
2467.8 |
Initial Penalty |
4113.0 |
Final Order |
2024-05-28 |
Nr Instances |
1 |
Nr Exposed |
3 |
Related Event Code (REC) |
Referral |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms shall be kept clean and orderly and in a sanitary condition. a) Carpentry Shop Floor: On or about November 14, 2023, and at times prior thereto the employer exposed employees to fire hazards in that employees were allowed to work in areas where combustible dust had accumulated on floors, walls, purlins, duct work, equipment, and other exposed upper surfaces from 1/8 inch to 2 inches in depth. |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19100307 C |
Issuance Date |
2024-03-25 |
Abatement Due Date |
2024-04-22 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2024-05-28 |
Nr Instances |
1 |
Nr Exposed |
3 |
Related Event Code (REC) |
Referral |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a) Carpentry Shop; On or about November 14, 2023, and at times prior thereto the employer exposed employees to fire hazards in that employees were allowed to work in areas where combustible dust had accumulated on electrical equipment that was not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location. |
|
|
347076341
|
0418600
|
2023-10-26
|
1151 OLD COLUMBUS ROAD, OPELIKA, AL, 36804
|
|
Inspection Type |
Planned
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2023-10-27
|
Emphasis |
P: AMPUTATE, N: AMPUTATE, L: FORKLIFT
|
Case Closed |
2024-02-20
|
Related Activity
Type |
Referral |
Activity Nr |
2101455 |
Health |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100212 A03 II |
Issuance Date |
2024-01-04 |
Current Penalty |
5123.4 |
Initial Penalty |
8539.0 |
Final Order |
2024-02-13 |
Nr Instances |
2 |
Nr Exposed |
5 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Steel Shop/Reinforcing Department (Ironworker - Shear Area): On or about October 26, 2023, and at times prior, the employer exposed employees to amputation hazards in that point of operation front guarding was not provided to employees performing metal shear operations for production on the Scotchman Ironworker (Model No.: 12012, Serial No.: 5043M593). b) Steel Shop/Reinforcing Department (Ironworker - Punch Area): On or about October 26, 2023, and at times prior, the employer exposed employees to amputation hazards in that point of operation side guarding was not provided to employees performing metal punch operations for production on the Scotchman Ironworker (Model No.: 12012, Serial No.: 5043M593). |
|
|
340929686
|
0418600
|
2015-09-17
|
1151 OLD COLUMBUS ROAD, OPELIKA, AL, 36804
|
|
Inspection Type |
Complaint
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2015-09-17
|
Case Closed |
2016-01-07
|
Related Activity
Type |
Complaint |
Activity Nr |
1019791 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100179 G03 VII |
Issuance Date |
2015-11-25 |
Abatement Due Date |
2015-12-15 |
Current Penalty |
2100.0 |
Initial Penalty |
3500.0 |
Final Order |
2015-12-23 |
Nr Instances |
1 |
Nr Exposed |
6 |
Related Event Code (REC) |
Complaint |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.179(g)(3)(vii): Pushbuttons in pendant station(s) did not return to the off position when pressure was released by the crane operator: (a) Overhead crane in the rear section of the facility: on or about September 17, 2015: the employer failed to ensure that the controls for the crane used to move large concrete work pieces returned to the off position when released exposing employees to struck-by and crushed by hazards. |
|
|
340686492
|
0418600
|
2015-06-03
|
1151 OLD COLUMBUS ROAD, OPELIKA, AL, 36804
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2015-06-03
|
Emphasis |
L: FORKLIFT, N: AMPUTATE
|
Case Closed |
2015-08-05
|
Related Activity
Type |
Referral |
Activity Nr |
988434 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100213 C01 |
Issuance Date |
2015-06-17 |
Abatement Due Date |
2015-06-29 |
Current Penalty |
3000.0 |
Initial Penalty |
5390.0 |
Final Order |
2015-07-08 |
Nr Instances |
1 |
Nr Exposed |
4 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) At Mold Shop: On or about June 3, 2015 and at times prior; the employer allowed his employees to remove the guard covering the blade on the circular rip saw exposing employees to amputation hazards. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19101030 F01 I |
Issuance Date |
2015-06-17 |
Abatement Due Date |
2015-06-25 |
Current Penalty |
3000.0 |
Initial Penalty |
5390.0 |
Final Order |
2015-07-08 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1030(f)(1)(i): The employer did not make post-exposure evaluation and follow-up available to an employee(s) who had an exposure incident: a) At Castone Corporation: On or about June 3, 2015 and at times prior: the employer failed to make available the Hepatitis - B vaccine to an employee whom assisted another and inadvertently got blood on himself. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19040039 A02 |
Issuance Date |
2015-06-17 |
Abatement Due Date |
2015-06-25 |
Current Penalty |
2000.0 |
Initial Penalty |
3273.0 |
Final Order |
2015-07-08 |
Nr Instances |
1 |
Nr Exposed |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours: a) At Castone Corporation: On or about June 3, 2015 and at times prior; the employer failed to report an amputation that occurred to an employee operating a table saw within 24 hours of the amputation occurring. |
|
Citation ID |
02002 |
Citaton Type |
Other |
Standard Cited |
19101200 H01 |
Issuance Date |
2015-06-17 |
Abatement Due Date |
2015-07-14 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2015-07-08 |
Nr Instances |
1 |
Nr Exposed |
6 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) At Castone Corporation: On or about June 3, 2015 and at times prior; the employer exposed employees to chemical hazards in that employees were not provided the new information and training on the Global Harmonized System (GHS) to include Safety Data Sheets. |
|
|
339369431
|
0418600
|
2013-08-28
|
1151 OLD COLUMBUS ROAD, OPELIKA, AL, 36804
|
|
Inspection Type |
Planned
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2013-08-29
|
Emphasis |
L: FORKLIFT, N: AMPUTATE, P: AMPUTATE
|
Case Closed |
2014-03-06
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
5A0001 |
Issuance Date |
2013-10-22 |
Current Penalty |
1190.0 |
Initial Penalty |
2380.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crush hazards while operating a forklift without a seatbelt: a) 1511 Old Columbus Road, Opelika AL; On or about August 28, 2013 and at times prior thereto the employer exposed employees to crush hazards in that employees were allowed to operate a forklift with no seatbelt. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19100022 A01 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
2100.0 |
Initial Penalty |
4200.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a) Reset Line; On or about August 28, 2013 and at times prior thereto the employer exposed employees to slip and trip hazards in that employees were required to walk and work in areas that had large quantities of used scrap wood and other trash piled up. |
|
Citation ID |
01003 |
Citaton Type |
Serious |
Standard Cited |
19100023 A08 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1050.0 |
Initial Penalty |
2100.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk were not guarded: a) Mixing Room; On or about August 28, 2013 and at times prior thereto the employer exposed employees to trip hazards in that employees were allowed to walk and work around a 6 1/2 inch floor hole that was not guarded. |
|
Citation ID |
01004 |
Citaton Type |
Serious |
Standard Cited |
19100023 D01 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
892.5 |
Initial Penalty |
1785.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.23(d)(1): Flights of stairs having four or more risers were not equipped with a standard railing as specified in paragraphs (d)(1)(i) through (v) of this section: a) Maintenance Shop; On or about August 28, 2013 and at times prior thereto the employer exposed employees to fall hazards in that employees were allowed to walk up and down a set of stairs with four or more risers that did not have a standard railing which included a mid-rail. |
|
Citation ID |
01005 |
Citaton Type |
Serious |
Standard Cited |
19100146 C01 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2014-03-05 |
Current Penalty |
1750.0 |
Initial Penalty |
3500.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces: a) Yard and production floor; On or about August 28, 2013 and at times prior thereto the employer exposed employees to confined space hazards in that the employer has multiple silos, aggregate bins, and other confined spaces which have not been evaluated as to permit required or not. |
|
Citation ID |
01006A |
Citaton Type |
Serious |
Standard Cited |
19100147 C05 I |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1750.0 |
Initial Penalty |
3500.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) Batch Mixer; On or about August 28, 2013 and at times prior thereto the employer exposed employees to potential hazardous energies in that the employer had not provided authorized employees locks for isolating and securing machine energy sources. |
|
Citation ID |
01006B |
Citaton Type |
Serious |
Standard Cited |
19100147 C07 I |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees. a) Batch Mixer; On or about August 28, 2013 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on equipment without first being trained to ensure those employees had the knowledge and skills for the safe application, usage, and removal of energy controls. |
|
Citation ID |
01006C |
Citaton Type |
Serious |
Standard Cited |
19100147 D02 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment: a) Batch Mixer; On or about August 28, 2013 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on the mixer without locking it out in accordance with the established procedures. |
|
Citation ID |
01006D |
Citaton Type |
Serious |
Standard Cited |
19100147 F03 II D |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Batch Mixer; On or about August 28, 2013 and at times prior thereto the employer exposed employees to potential hazardous energies in that an employee was allowed to work on the mixer without affixing his personal lockout device on the energy control lockout point. |
|
Citation ID |
01007A |
Citaton Type |
Serious |
Standard Cited |
19100213 C02 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1050.0 |
Initial Penalty |
2100.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Mold Area; On or about August 28, 2013 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to use a table saw with the spreader bar removed. |
|
Citation ID |
01007B |
Citaton Type |
Serious |
Standard Cited |
19100213 C03 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Mold Area; On or about August 28, 2013 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to use a table saw with the kickback fingers removed. |
|
Citation ID |
01008A |
Citaton Type |
Serious |
Standard Cited |
19100219 C04 II |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1190.0 |
Initial Penalty |
2380.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: a) Maintenance Shop; On or about August 28, 2013 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk and work around an air compressor with an unguarded projecting shaft with keyway. |
|
Citation ID |
01008B |
Citaton Type |
Serious |
Standard Cited |
19100219 D01 |
Issuance Date |
2013-10-22 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Maintenance Shop; On or about August 28, 2013 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk and work around an air compressor with unguarded pulleys. |
|
Citation ID |
01008C |
Citaton Type |
Serious |
Standard Cited |
19100219 E01 I |
Issuance Date |
2013-10-22 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) Maintenance Shop; On or about August 28, 2013 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk and work around an air compressor with an unguarded belt. |
|
Citation ID |
01009 |
Citaton Type |
Serious |
Standard Cited |
19100242 B |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1400.0 |
Initial Penalty |
2800.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Shop Area; On or about August 28, 2013 and at times prior thereto the employer exposed employees to compressed air hazards in that employees were allowed to use air blowers for cleaning purposes that were not reduced to less than 30 p.s.i. |
|
Citation ID |
01010 |
Citaton Type |
Serious |
Standard Cited |
19100243 C01 |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1050.0 |
Initial Penalty |
2100.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4): a) Shop Area; On or about August 28, 2013 and at times prior thereto the employer exposed emplooyees to struck-by hazards in that employees were allowed to use a Dewalt portable grinder with the guard removed. |
|
Citation ID |
01011 |
Citaton Type |
Serious |
Standard Cited |
19100303 G02 I |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1190.0 |
Initial Penalty |
2380.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets of other forms of approved enclosures, or other means listed under this provision: a) Maintenance Shop; On or about August 28, 2013 and at times prior thereto the employer exposed employees to electrical hazards in that employees were allowed to walk and work around an air compressor with the pressure switch cover removed exposing live 220 volt AC. |
|
Citation ID |
01012 |
Citaton Type |
Serious |
Standard Cited |
19100305 B01 II |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
1400.0 |
Initial Penalty |
2800.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Mold Area; On or about August 28, 2013 and at times prior thereto the employer exposed employees to electrical hazards in that employees were allowed to access a breaker panel with an open breaker slot exposing live electrical parts in the panel. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19100178 L04 III |
Issuance Date |
2013-10-22 |
Abatement Due Date |
2013-10-30 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2013-11-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Production Area; On or about August 28, 2013 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to operate a powered industrial truck without the employer ensuring that the operators had received the required evaluation at least once every three years as specified in the regulation. |
|
|
107004954
|
0418600
|
1991-07-16
|
1511 OLD COLUMBUS RD., OPELIKA, AL, 36801
|
|
Inspection Type |
Planned
|
Scope |
Complete
|
Safety/Health |
Safety
|
Close Conference |
1991-07-16
|
Case Closed |
1991-09-26
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Other |
Standard Cited |
19100147 C01 |
Issuance Date |
1991-08-01 |
Abatement Due Date |
1991-09-01 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
Citation ID |
01002 |
Citaton Type |
Other |
Standard Cited |
19100253 B02 II |
Issuance Date |
1991-08-01 |
Abatement Due Date |
1991-08-06 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
|
18388348
|
0418300
|
1989-12-06
|
1511 OLD COLUMBUS ROAD, OPELIKA, AL, 36801
|
|
Inspection Type |
Complaint
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
1989-12-06
|
Case Closed |
1990-01-03
|
Related Activity
Type |
Complaint |
Activity Nr |
72653066 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19100213 C02 |
Issuance Date |
1989-12-08 |
Abatement Due Date |
1989-12-29 |
Current Penalty |
240.0 |
Initial Penalty |
240.0 |
Nr Instances |
2 |
Nr Exposed |
8 |
Related Event Code (REC) |
Complaint |
Gravity |
04 |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19100213 C03 |
Issuance Date |
1989-12-08 |
Abatement Due Date |
1989-12-29 |
Nr Instances |
2 |
Nr Exposed |
8 |
Related Event Code (REC) |
Complaint |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19100213 H01 |
Issuance Date |
1989-12-08 |
Abatement Due Date |
1989-12-29 |
Current Penalty |
300.0 |
Initial Penalty |
300.0 |
Nr Instances |
1 |
Nr Exposed |
2 |
Related Event Code (REC) |
Complaint |
Gravity |
05 |
|
Citation ID |
01003 |
Citaton Type |
Serious |
Standard Cited |
19100213 H04 |
Issuance Date |
1989-12-08 |
Abatement Due Date |
1989-12-29 |
Current Penalty |
360.0 |
Initial Penalty |
360.0 |
Nr Instances |
3 |
Nr Exposed |
8 |
Related Event Code (REC) |
Complaint |
Gravity |
06 |
|
Citation ID |
01004 |
Citaton Type |
Serious |
Standard Cited |
19100242 B |
Issuance Date |
1989-12-08 |
Abatement Due Date |
1989-12-12 |
Current Penalty |
180.0 |
Initial Penalty |
180.0 |
Nr Instances |
1 |
Nr Exposed |
10 |
Gravity |
03 |
|
|
101262707
|
0418300
|
1989-02-22
|
1511 OLD COLUMBUS ROAD, OPELIKA, AL, 36801
|
|
Inspection Type |
Complaint
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
1989-02-23
|
Case Closed |
1989-03-03
|
Related Activity
Type |
Complaint |
Activity Nr |
72482102 |
Safety |
Yes |
|
|
101228914
|
0418300
|
1989-02-22
|
1511 OLD COLUMBUS ROAD, OPELIKA, AL, 36801
|
|
Inspection Type |
Accident
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
1989-03-28
|
Case Closed |
1989-04-07
|
Related Activity
Type |
Accident |
Activity Nr |
360652093 |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
5A0001 |
Issuance Date |
1989-03-28 |
Abatement Due Date |
1989-04-03 |
Current Penalty |
800.0 |
Initial Penalty |
800.0 |
Nr Instances |
1 |
Nr Exposed |
2 |
Related Event Code (REC) |
Accident |
Gravity |
08 |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19100132 A |
Issuance Date |
1989-03-28 |
Abatement Due Date |
1989-04-03 |
Nr Instances |
3 |
Nr Exposed |
3 |
|
Citation ID |
02002 |
Citaton Type |
Other |
Standard Cited |
19100180 D06 |
Issuance Date |
1989-03-28 |
Abatement Due Date |
1989-04-05 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
|
101201861
|
0418300
|
1988-01-25
|
1511 OLD COLUMBUS ROAD, OPELIKA, AL, 36801
|
|
Inspection Type |
Planned
|
Scope |
Complete
|
Safety/Health |
Safety
|
Close Conference |
1988-01-25
|
Case Closed |
1988-03-23
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Other |
Standard Cited |
19100305 B01 |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-01 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
Citation ID |
01002 |
Citaton Type |
Other |
Standard Cited |
19100305 B02 |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-01 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
Citation ID |
01003 |
Citaton Type |
Other |
Standard Cited |
19101200 E01 |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-25 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
Citation ID |
01004 |
Citaton Type |
Other |
Standard Cited |
19101200 F04 I |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-25 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
Citation ID |
01005 |
Citaton Type |
Other |
Standard Cited |
19101200 G01 |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-25 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
Citation ID |
01006 |
Citaton Type |
Other |
Standard Cited |
19101200 H |
Issuance Date |
1988-02-25 |
Abatement Due Date |
1988-03-25 |
Nr Instances |
1 |
Nr Exposed |
10 |
|
|
1223098
|
0418300
|
1985-08-08
|
1511 OLD COLUMBUS RD, OPELIKA, AL, 36801
|
|
Inspection Type |
Planned |
Scope |
Complete |
Safety/Health |
Safety |
Close Conference |
1985-08-09 |
Case Closed |
1985-09-17 |
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100305 D |
Issuance Date |
1985-08-27 |
Abatement Due Date |
1985-09-03 |
Current Penalty |
240.0 |
Initial Penalty |
240.0 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19100215 B09 |
Issuance Date |
1985-08-26 |
Abatement Due Date |
1985-08-29 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
Citation ID |
02002 |
Citaton Type |
Other |
Standard Cited |
19100303 F |
Issuance Date |
1985-08-27 |
Abatement Due Date |
1985-09-03 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
Citation ID |
02003 |
Citaton Type |
Other |
Standard Cited |
19100305 B02 |
Issuance Date |
1985-08-26 |
Abatement Due Date |
1985-09-03 |
Nr Instances |
1 |
Nr Exposed |
1 |
|
|